- Phone：
- 0086-13506565739
- Tel：
- 0086-577-66851569
- E-mail：
- 75156449@qq.com
- Address：
- Shayuan Village Nanbin District Ruian City,Wenzhou,Zhejiang,China
Features
The HSR Serial unit flexo presses is our newest machine which aimed to produce high quality label with high speed and IML label function . the large 1050mm unwinding with servo motor keeps the roller running stable and auto stop on the end .
This machine compact size and short web path keeps wastage of material
The full machine adopt all servo motor , there all total 25 pcs servo motor , unwinding unit , rewinding unit ,two nipping roller ,8 set of printing unit ,2 set of die cutting unit ,matrix rewinding unit which keep the tension of film or paper smoothly and stable.
|
Max.Web width |
350/460/530/670mm |
|
Max.Printing width |
340/450/520/660mm |
|
Max.Unwind Diameter |
1050mm |
|
Max.Rewind Diameter |
1050mm |
|
Max.printing speed |
200m/min |
|
Printing Precision accuracy |
|
|
Rang of printing |
9.5”-24” |
|
Max.label die cutting speed |
150m/min |
|
Pre –registration |
Semi |
|
Auto registration |
Servo motor with color sensor |
|
Material |
All Paper material ,Aluminum material ,unsupport film and shrink |
|
Thickness of material |
0.02mm—0.35mm |
|
Power |
380V 50/60HZ |
|
Air Supply |
0.8KPA |
|
60A |
|
|
Machine Weight |
About 10000KG depend on quantity of unit |
|
Start machine power |
|
|
high speed power |
|
UNWINDING UNIT
? Maximum diameter of unwinding is 1050mm adopt pneumatic cylinder for loading and unloading
? Air expanding shaft for 3 "
? Servo motor for unwinding
? Paper cutting platform for pneumatic clamping paper
? Electronic Web aligner for accurate alignment of the Web (BST German)
? Pneumatic components adopted by Airtac
? Corona device effectively increases the amount of ink on film （optional)
? Removing static electricity from material surface with electrostatic device（optional)
? Dust removal from the surface of raw material with dust removal device（optional)
SPLICE TABLE (ON WEB GUIDING)
? Pneumatic controls splice table for east splicing and web jointing
? Individual pneumatic controls for each splice bar
? Splice table with cutter support slot
Nipping driver
? Servo driver controls the infeed and out with auto tension for accurate tension of substrate into printing
? The nipping roller works with pneumatic cylinder and PU roller
Printing unit
? Wide range from 10” to 24” of plate roller
? Teflon technology for ink tray which is easy to clean ,ink roller ,impression roller with tolerance as +/- 0.01mm and ceramic anilox from China
? Quick change the ink tray and pneumatic lock
? Quick lock and unload for plate roller without using tools
? NO Helical gears for plate roller and ceramic anilox ,etc
? A Auxiliary motor for anilox keeps running while the press stops to avoid drying the ink on the anilox surface especially when we use water base ink
? Surface hard aluminum guide roller
? Special structure of scraping blade ensure the cleaning of the surface of anilox
? Turn bar on the rail can move across the printing units
? monitor on the end of printing unit can inspect the registration of printing (BST)
? The Impression roller is also a Chiller Drum which in order to cool while printing ,that will not make the material shrink.
? 2 ton capacity Chiller with water circulation system
? Beside saving power ,the LED UV which this machine use also have Chiller connection
? Hot air drying with individual heaters and blowers for optimum usage (Optional)
? Delam -Relam Unit with enough roller fo proper control of web during Delam to print up to 4 colors on back of web (glue side)
? Pre-Registration system to set the printing cylinders to near registation before start of printing ,this is also why this machine can print with shrink film
? Auto-Registration system used by this machine because of plate roller and impression roller adopt its own independent servo motor
? Lateral position of printing unit fine turning by motor
Cold Stamping Device
? Cold Foil Unit on rail for movable across printing units
? Magnetic power and clutch control the Cold stamping device
? Pneumatic expanding shaft for unwinding and rewinding
Rotary die cutting
? 1 set of die cutting station
? total 3 rollers die cutting system for die cutting on the front or back side of the web by changing the anvil roller and magnetic roller
? A crane assembled near the die cutting station load and unload the magnetic cylinder
Matrix rewinding system
? Max. waste rewinding diameter 900mm
? Pneumatic expand air shaft 3”
? A servo driver controls the running of matrix rewinding
Rewinding device
? Maximum diameter 1050mm
? Air expanding shaft for 3 “
? Pneumatic cylinder for loading and unloading
